LiteTouch – Lighting Automation Systems

LiteTouch Engineering Data
Radio frequency 902-928 MHz, unlicensed ISM band supply current
Type Frequency hopping spread spectrum transceiver
Frequency control Direct FM
Network topology Point-multipoint and point-to-point multi-drop transparent networking
Channel capacity 65,000 network identifiers share 25 hop channels
Serial data interface RS-232, DCE
I/O data rate Software selectable 2400-57,600 bps
Performance
RF baud rate 9,200 bps
Data throughput 19,200 bps
Transmit power output 100 mW nominal 100 mW nominal
Rx sensitivity -107 dBm
Range1 Indoor: 600′ to 1500′
Outdoor: 7 miles with dipole, > 20 miles with gain antenna
Interference rejection 70 dB at pager and cellular phone frequenciesRange calculations are for 9600 baud radio, line-of-sight. Actual range will vary based upon specific board integration,
antenna selection, environment and the OEM’s device.

Power Requirements
Supply voltage 7-18 VDC
Current consumption Tx 210 mA, Rx 70 mA, sleep TBD
Physical Properties
Enclosure size 2.75” x 5.50” x 2.1875” (7.90 x 13.90 x 3.80)cm
Weight 6.9 oz. (195.61 g)
Operating temperature 0° C to 70° C (- 40° C to 85° C available)
Operating humidity 10% to 90% (non-condensing)
Antenna
Antenna connector Reverse-polarity SMA
Antenna impedance 50 ohms unbalanced
Approved antenna 1
⁄2 wave flexible whip (6″), SMA, 2.1 dBi gain

Programing Software Legacy Requirements

LiteWare software allows you to incorporate utilities to plan, design, and program any 5000LC project and runs on Windows 32-bit operating systems (Windows 95/98/NT/2000/XP).